Robots are moving into malls, hospitals and warehouses
The battery must not be its risk source
In indoor human-robot coexistence, a battery failure is a safety incident, not a product quality issue. QuanVol robotics / AGV power batteries are built on a solid-state polymer pouch cell (in-situ cured) system. The QV-6060110PL reaches an internal resistance as low as ≤6mΩ, and the QV-1260110PL delivers a single-cell capacity of 10000mAh, leaving power headroom for the moving platform while holding the safety baseline.
A robot running indoors
makes the battery the entry point of a safety incident
Robots start and stop frequently, climb slopes and deliver sustained high current, and the platform itself often moves right through crowds of people. Conventional systems have two weak points under this combination: heat generation at high current, and the consequences of thermal runaway.
QV-PL Series Solid-State Pouch Cells · Model Overview
Multiple models are supplied within the same product line; selection is determined by the actual discharge rate and runtime requirements| Model | Nominal Capacity | Rated Capacity | System | Positioning |
|---|---|---|---|---|
| QV-606090PL | 5000mAh | 4950mAh | Solid-state polymer lithium-ion (in-situ cured) | Standard type, long-cycle light-load applications |
| QV-6060110PL | 5000mAh | 5000mAh | Solid-state polymer lithium-ion (in-situ cured) | 2C high-rate type, power applications |
| QV-1260110PL | 10000mAh | / | Solid-state lithium-ion (in-situ cured) | High-capacity type, portable power / long-runtime equipment |
Identical capacity does not mean interchangeable. The QV-606090PL and QV-6060110PL are both 5000mAh, but their rate capability and internal resistance are entirely different. Selection is determined by the customer's actual discharge rate requirement.
QV-6060110PL · 2C High-Rate Type Specifications
Primary model for power applications, the recommended selection in this product lineCore electrical performance
QV-6060110PL| Nominal Capacity | 5000mAh (0.2C standard discharge) |
|---|---|
| Rated Capacity | 5000mAh |
| Nominal Voltage | 3.7V |
| Delivery Voltage | ≥3.7V (within 10 days of shipment) |
| Charge Upper Limit Voltage | 4.2V |
| Discharge End Voltage | 2.5V |
| Internal Resistance | ≤6mΩ (AC 1kHz at half-charged state) |
| Charge Current | Standard 0.2C (0~15℃) / 0.5C (15~45℃) |
| Maximum Continuous Discharge Current | 2C |
| Standard Discharge Current | 0.2C |
| Charge Operating Temperature | 0 ~ 45℃ |
| Discharge Operating Temperature | -20 ~ 55℃ |
| Storage Temperature | 1 month -10~+45℃; 3 months -10~+35℃; 12 months 0~25℃ (65±25% RH) |
| Weight | 85±10 g |
QV-606090PL · Standard Type (Long Cycle, Light Load)
QV-606090PL| Nominal Capacity | 5000mAh (0.2C standard discharge) |
|---|---|
| Rated Capacity | 4950mAh |
| Nominal Voltage | 3.7V |
| Internal Resistance | ≤30mΩ (AC 1kHz at half-charged state) |
| Maximum Continuous Discharge Current | 2C |
| Discharge Operating Temperature | -20 ~ 55℃ |
| Weight | 83±1 g |
The only differences from the QV-6060110PL are internal resistance and weight, yet the selection outcome is entirely different: handling equipment with light loads and long cycles uses the standard type, while models that start and stop frequently and require instantaneous high current use the high-rate type.
QV-1260110PL · High-Capacity Type Specifications
Preferred for long-runtime models, reducing the number of series and parallel connections in the packCore electrical performance
QV-1260110PL| Nominal Capacity | 10000mAh @0.2C discharge |
|---|---|
| Nominal Voltage | ≥3.7V |
| Charge Cut-off Voltage | 4.2V |
| Discharge End Voltage | 2.5V |
| Internal Resistance | ≤30mΩ (AC 1kHz at half-charged state) |
| Maximum Continuous Charge Current | 0.2C (cell surface temperature 10~15℃); 0.5C (15~45℃) |
| Maximum Continuous Discharge Current | 0.2C（-10~15℃）；1.0C（15~60℃） |
| Standard Charge | 0.2C constant current to 4.2V, then constant voltage until current ≤0.02C |
| Standard Discharge | 0.2C constant-current discharge to 2.5V |
| Fast Discharge | 0.3C constant-current discharge to 2.5V |
| Dimensions | Length ≤111.3mm (excluding exposed tab tape) × width ≤60.2mm × thickness ≤12.1mm |
| Operating Temperature | Charge 10~45℃; discharge -20~60℃ |
| Storage Temperature | 1 month -10~40℃ |
| Shipping Voltage | 3.80V |
Cycle life data for this model will be added once the technical team confirms the evaluation criteria. This page does not cite cycle life data.
Covering three indoor human-robot coexistence scenarios
Service Robots
Reception and delivery robots in malls, hospitals and hotels operate around the clock in close proximity to people. Low internal resistance brings lower heat generation and steadier continuous output, which is the entry ticket for this class of equipment.
AGV / AMR
Mobile chassis for in-plant logistics and flexible production lines, with high start-stop frequency and tight charging schedules. The QV-1260110PL delivers 10000mAh per cell, making the pack smaller and the runtime longer, which simplifies chassis layout.
Warehouse Logistics Automation Equipment
Shuttle vehicles, sorting lines and stackers run unattended year round. A wide discharge temperature range (-20 ~ 55℃) and the safety baseline of a solid-state system mean equipment moving between cold storage and ambient warehouses does not require a redesigned battery solution.
Send us your robot duty-cycle parameters
Tell us the total system weight, peak current, runtime per charge and available structural space. QuanVol will provide cell selection, series and parallel configuration and a sample validation schedule.
The above are the specifications of each model in the QV-PL series of the QuanVol robotics / AGV power battery product line. Any citation of data must state the model; values differ between models and the datasheet for that model prevails. Product pricing is quoted individually according to the specific model and order quantity and is not disclosed through public channels.